The original design for the automatic pistol which later became known as the Savage, since its production was taken up by the Savage Arms Co. of Utica, N. Y., seems to have been the work of William Condit. The first development and prototype manufacture appear to have taken place in the first months of 1904. Later in that year Condit joined with Elbert H. Searle with whom further improvements were jointly made. By 1905 two distinctly different models had been produced in prototype form: (1) a fixed-barrel, retarded-blowback design and (2) a moving-
barrel, recoil-operated design. Patents were issued by the U.S. Patent Office on November 21, 1905, and at the end of that year both designs had been licensed for manufacture by the Savage Arms Co. At this time Condit dropped out of the picture and Searle represented their interests at the Savage plant.
It was the original intention of the Savage Co. to bring out a .32 caliber version of the blowback pistol only, but when the U.S. Ordnance Department invited manufacturers to submit automatic pistols for trial at the Springfield Armory in 1907 they began constructing .45 cal. versions of both the blowback and the recoil-operated types. One .45 cal. blowback pistol had been completed by December 1906, and this weapon (which was quite different from subsequent pistols of this caliber) was submitted to the Springfield Armory. It was found not to be acceptable for military use.
By mid-1906 the firm had decided to resume planning for a .32 cal. blowback type pistol, and they started tooling up for production in the winter of 1906. Judging from the time that elapsed before production began it is surmised that several prototype specimens were probably made before a final one was accepted. The .32 cal. Savage was introduced in August 1907, with the official nomenclature Savage Automatic Pistol, Pocket Model, Caliber .32. This very specific designation was used to distinguish it from the .45 caliber specimen which (as well as later .45 cal. types) was referred to as the Government Model. The September 1907 issue of Outdoor Life contained what is said to be the first public mention of this new pistol, in an unauthorized article written by a man who seems to have had only a superficial knowledge of his subject, much to the annoyance of some persons in the Savage Co. (Fig. 244).
The earliest form of the pistol is distinguished by the absence of lettering at the safety lever and by the small-sized letters in the insigne on the grip pieces. A further characteristic is the fact that the checkered head of the safety is a complete circle, the edge of which overlaps the grip piece when it is in the „Fire' position. Truembroidery software for mac download. Serial numbering began at No. 1. By 1909 the left grip piece was recessed to partially accept the safety lever when in the „fire' position, and the words „Fire' and „Safe' were added at the appropriate places on the frame. The checkered head was also partly cut away on the left side (in „Fire' position).
The .380 caliber model was introduced in 1913, with serial numbering starting at No. 1, and with the letter B added. Curiously, in some specimens this letter is used as a prefix to the serial number while in other specimens it will be found used as a suffix thereto. This pistol followed the design of the .32 cal. 1907 Model. In 1915, however, a modified version of both the .32 and .380 appeared; this modification consisted of the addition of a grip safety (which was commendable) and the elimination of the hammer-shaped cocking lever that was exposed at the rear end of the slide in the original model. This 1915 version is usually referred to as the Hammerless Model, though that is a misnomer since no Savage pistol has a hammer. The new model was numbered in continuation of the same series as the original .32 and .380. The Hammerless model was short lived, as its manufacture was discontinued in 1917 in favor of a new-style external cocking lever, which had a spur shape rather than the smaller, rounded (or dome shaped) piece formerly used. This was a desirable change for three reasons. The spur-shaped cocking piece made it easier to cock the weapon by hand, and its observable position told the user whether the arm was cocked or not. It also made it possible to carry a cartridge in the barrel with the arm uncocked, by letting down the cocking piece (carefully) after a cartridge had been chambered by pulling back the slide. With the original cocking piece this was a very dangerous procedure and with the Hammerless model obviously impossible. With the Hammerless model one could not tell, from external examination, whether there was a cartridge in the chamber. The new model still retained one undesirable feature (present in all models) in that the recoil spring is so stiff that drawing back the slide to chamber a cartridge is a difficult operation-almost as difficult as in the case of the Dreyse. Another noticeable change which has been observed on Mod. 1907 pistols of late issue (serial numbers above 200,000, presumably ca. 1917) is the style of the serrations in the finger grips on the rear of the slide. Originally these were wide, deep, and 9 in number, while in the later issue they were much narrower and 28 in number.
- Savage made three production automatic pistols, the model 1907, the model 1915, and the model 1917. The serial numbers run from 1 to about 245000 for the.32 pistols, and from B2000 to about.
- Aug 16, 2020 Savage 1907 Three Digit Serial - Excellent I am not a Savage pistol collector. I just happened to run across a real gem. And I do like to research my purchases. But short of purchasing Bailey Brower, Jr.' S Savage Pistols book, the information on the Savage 1907 is rather scattered across the internet. So, I've gathered together a few web-links below to help others research their pistols.
Late in 1917 a new, enlarged, and much-bettershaped grip was introduced. The grip pieces were provided with a new Savage monogram, still carrying an Indian head (and an extended arm holding a gun), quite different from the original. For some unaccountable reason the grip safety was eliminated-a change not to be praised. The spur-shaped cocking piece was retained, however. Both the earlier 1907 and the Hammerless models were dropped at the end of 1917 and only the .32 and .380 cal. Model 1917 was manufactured from that time on. Serial numbering appears to have been in continuation of the earlier numbering series. Production of Model 1917 was discontinued in 1928 and has never been resumed. Competition with better-designed and better-known automatic pistols made continuation unprofitable.
Savage Rifle Serial Number Lookup
Despite the unsatisfactory showing of the .45 cal. Savage pistol submitted to the Ordnance Department early in 1906, the Savage Co. was given an order for 200 pistols in .45 caliber in an improved design. Many of the features of the pistol as originally submitted were highly praised by the examining Board, even though it was not accepted. The order was not completed until the fall of 1908, at which time some 230 numbered specimens and at least a dozen unnumbered and otherwise variant specimens had been made. These 230 pistols were delivered for field trials in 1909 and 1910. Having proved to be unsatisfactory for military purposes they were sold at public auction in 1912. At least four other forms of .45 cal. automatic pistols were produced in small quantity from 1909 to 1911 and are now collectors' items. No Savage automatic pistol was ever adopted by the U.S., but the Portugese Government adopted the .380 cal. Model 1917 and used it as their official side arm until manufacture was discontinued in 1928. Whether these pistols supplied to the Portugese were especially marked or especially numbered is not known.
Shortly before World War I Savage decided to bring out a .25 caliber pistol. A set of tools was started and several dozen prototype specimens were made, but the arm was never offered for sale. Known prototype specimens are numbered in a series starting at 100,001. They had grip safeties and were finished in a commercial manner, as if they were intended for sale.
Savage automatic pistol Model 1907,.32 in. Cal., serial number 1. Ten shot magazine located in butt, overall length 6.5 inches (165 mm). Made by Savage Arms Corporation, Utica, New York, 1907. This finely engraved and decorated pistol with mother of pearl grips is serial no. 1, and has the initials 'B A' inlaid into the underside of the frame in gold. Ammo for savage model 1907 32 cal, holster for savage 1907, savage arms.co. Usa cal.32., savage model 1907, savage model 1907 serial numbers, savage pistols 32cal, show me a 1907 32 pistol, value of savage model 1907, where is the serial number located on savage 1907, www.2156xx.com. Post your serial number, XX last two numbers.
Savage Model 1907 Serial Numbers
Another .25 cal. Savage, having a shorter barrel and frame, but otherwise like the former, has been reported-the design of which dates from 1916 or 1917. The entry of the U.S. into the World War seems to have prevented this pistol from being offered commercially. After the war, sometime in 1919, plans for its manufacture were resumed and a few were made, fully marked and bearing serial numbering which started at 1000-M. Only a very few have been seen and, no doubt, most of those that were made are now in the hands of collectors.
![Pistol Pistol](https://oldmanmontgomery.files.wordpress.com/2016/12/savage-19-2-fire-and-safe-markings.jpg?w=584)
Between 1910 and 1915 several minor variant forms of the .32 cal. Mod. 1907 pistol appeared. These included types with lanyard loops, cartridgeindicating collars around the barrel at the chamber, and variant styles of sights. The types that were fitted with lanyard loops may have been furnished on contract for police use, since they usually have registry serial numbers on the right side of the frame. Red bull bc one apk data download.
Fig. 244. .32 cal. Savage Mod. 1907. Sectional view.
Was this article helpful?
Knife Throwing Techniques of the Ninja
Knife Throwing Techniques of the Ninja. span stylecolor: 000000Do you want to learn the art of throwing knives? Ever wondered how it is done to perfection every time? Well here is your chance. This book contains well over 50 pages of detailed information and illustrations all about the art of knife throwing. This intriguing book focuses on the ninja's techniques and training. This is a must for all martial artists and anyone wanting to learn the knife throwing techniques of the ninja.span
First post here. Thanks for the fine venue.
I am a long time collector of military arms. And though the following pistol is not the 1907 US Trials or WWI French or Portuguese Military Contract, the commercial guns were derived from the military platform. I had wanted one of these artfully built pistols for a long time.
So, the opportunity arose last week in a multi-gun purchase. I just didn't realize what I had bought until I did some research.
It's a rare early example with all of the original features, and in uncommonly seen high condition. At serial number 902, it falls within the first 2000 units manufactured in 1908. Fewer than 1% of all Model 1907 where built in this configuration. And with such a small first production run, coupled with general attrition from wear, breakage, parting out and guns which were returned to Savage for upgrades, not many are left today with all of the following original early features:
- Steel Grips, replaced by hard rubber in 1910
- Safety Lever with scalloped half-round thumb pad, replaced with checkered thumb pad in 1909
- No Trigger Block Safety Bar or channel cut inside frame for bar, trigger block introduced by 1913
- No 'SAFE' and 'FIRE' stamped on rear frame, introduced in 1910, 'SAVAGE' stamp on left frame 1913
- Early Barrel with thick lug, No Loaded Chamber Indicator, thinner lug in 1909, loaded indicator collar added 1913 to 1917
- Early Frame with narrow and shallow cartridge feed ramp, wider and deeper ramp introduced in 1910
- Early Slide with large lettering Address and more rounded ejection port, many later addresses and port design.
- Rear Sight fitted in dovetail, later rear sight incorporated into slide 1912
- Front Sight as blade insert, later forged as one with the slide
- Early Hammer (cocking piece) with cog lugs, later with spur style
- Mag Release operated from top of lever on front of grip strap, later located to bottom lever operation.
- Magazine, only one mag catch hole at bottom of mag spine.
- Serial Number located of bottom of frame in front of triggerguard, later on front face of frame
- Matte metal texture with Rust Blue finish, later with mirrored high-polish and bright Rust Blue, then Charcoal Blue
I bought this from an aging Korean War Veteran. He stated that he bought this from a retired insurance salesman who carried it in an inside vest pocket, in the cool leather pocket holster shown below.
The above list does not cover the Military Trials pistol or the similar commercial Savage Models 1915 or 1917, nor the .380 acp caliber option. But it doesn't mean they are less interesting or important. So here are a few links to provide more information and historical perspective.
http://americansocietyofarmscollecto..081_Goulet.pdf
http://www.vintagepistols.com/1907/index.html
http://averagejoeshandgunreviews.blo..07-32-acp.html
https://en.wikipedia.org/wiki/Savage_Model_1907
https://www.youtube.com/watch?v=G9yX2nO-PxY
The 1907 US Military Trials in .45 acp (with video)
https://www.forgottenweapons.com/ear..ols/savage-45/
And a quick way to date your pistol. Just enter your serial number and submit.
http://www.savage99.com/savage32_dates.htm
Detailed pictures of Early Features will follow.